{"title":"DCC Systems","description":"","products":[{"product_id":"dcc-sound-speaker-for-loksound-and-others","title":"DCC \"Sugarcube\" Sound speaker for Loksound and others","description":"\u003cp\u003eThis tiny sugarcube speaker can really make a noise!\u003c\/p\u003e\n\u003cp\u003eThe speaker is EXACTLY the same 8 ohm speaker supplied with ESU Loksound decoders however we supply it in our own custom ready made sound enclosure. No more fiddly gluing spacers together!\u003c\/p\u003e\n\u003cp\u003eOur sound enclosure is supplied fully sealed to make the most noise without distortion.\u003c\/p\u003e\n\u003cp\u003eWorks with any sound decoder that requires an 8 ohm (8R) speaker such as Loksound, Hornby TTS and many others.\u003c\/p\u003e\n\u003cp\u003eSize of enclosure is 16mm x 13mm x 17mm\u003c\/p\u003e\n\u003cp\u003eSupplied with two flying leads. Just solder this to a Hornby TTS decoder and hear the difference!\u003c\/p\u003e\n\u003cp\u003eTry and point your speaker upwards or forwards inside the loco (The silver plate is the base of the speaker, the sound comes out from the other side) It's no good pointing the speaker down at the track and expecting the sound to be clear.\u003c\/p\u003e\n\u003cp\u003eThese speakers are so good that at full volume you may notice the loco starts to rattle a little. \u003ca href=\"https:\/\/www.hobbytrax.com.au\/products\/self-adhesive-lead-weights-for-model-railways-5g-and-10g?_pos=1\u0026amp;_sid=a825b9019\u0026amp;_ss=r\"\u003eTry our little metal weights inside the loco to stop it vibrating!\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.hobbytrax.com.au\/products\/decoder-putty-20cm?_pos=1\u0026amp;_sid=55fe701fc\u0026amp;_ss=r\"\u003eTo hold everything in place, try our decoder putty!\u003c\/a\u003e\u003c\/p\u003e","brand":"Hobby Trax","offers":[{"title":"Default Title","offer_id":56062670209356,"sku":"0007-6617","price":10.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4428\/3980\/files\/DSC06635.jpg?v=1764079781"},{"product_id":"2-pin-terminal-plug-for-dynamis-lokprogrammer-and-esu-ecos-dcc","title":"2 pin terminal plug for Dynamis, Lokprogrammer and ESU Ecos DCC","description":"\u003cp\u003eAn ideal replacement if you've lost or damaged the plug on any of these DCC controllers:\u003c\/p\u003e\n\u003cp\u003eDynamis DCC\u003c\/p\u003e\n\u003cp\u003eLokprogrammer\u003c\/p\u003e\n\u003cp\u003eESU Ecos command station\u003c\/p\u003e\n\u003cp\u003eSupplied individually.\u003c\/p\u003e","brand":"Hobby Trax","offers":[{"title":"Default Title","offer_id":56062670471500,"sku":"3823-8385","price":4.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4428\/3980\/files\/2pinplug.png?v=1764079783"},{"product_id":"7-01mm-purple-ultra-thin-wire-for-dcc-decoders-and-models-10m","title":"7\/01mm purple ultra-thin wire for DCC decoders and models - 10m","description":"\u003cp\u003eA very special thin wire ideal for use with DCC decoders or wiring lights into models etc.\u003c\/p\u003e\n\u003cp\u003eJust 0.6mm in diameter and very flexible. Capable of 0.5A maximum.\u003c\/p\u003e","brand":"Hobby Trax","offers":[{"title":"Default Title","offer_id":56062684102988,"sku":"8430-6564","price":7.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4428\/3980\/files\/Screenshotfrom2023-07-0210-59-13.png?v=1764079839"},{"product_id":"7-01mm-blue-ultra-thin-wire-for-dcc-decoders-and-models-10m","title":"7\/01mm blue ultra-thin wire for DCC decoders and models - 10m","description":"\u003cp\u003eA very special thin wire ideal for use with DCC decoders or wiring lights into models etc.\u003c\/p\u003e\n\u003cp\u003eJust 0.6mm in diameter and very flexible. Capable of 0.5A maximum.\u003c\/p\u003e","brand":"Hobby Trax","offers":[{"title":"Default Title","offer_id":56062684135756,"sku":"8485-0404","price":7.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4428\/3980\/files\/Screenshotfrom2023-07-0210-55-27.png?v=1764079839"},{"product_id":"7-01mm-white-ultra-thin-wire-for-dcc-decoders-and-models-10m","title":"7\/01mm white ultra-thin wire for DCC decoders and models - 10m","description":"\u003cp\u003eA very special thin wire ideal for use with DCC decoders or wiring lights into models etc.\u003c\/p\u003e\n\u003cp\u003eJust 0.6mm in diameter and very flexible. Capable of 0.5A maximum.\u003c\/p\u003e","brand":"Hobby Trax","offers":[{"title":"Default Title","offer_id":56062684201292,"sku":"8445-3612","price":7.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4428\/3980\/files\/Screenshotfrom2023-07-0210-51-18.png?v=1764079840"},{"product_id":"7-01mm-grey-ultra-thin-wire-for-dcc-decoders-and-models-10m","title":"7\/01mm grey ultra-thin wire for DCC decoders and models - 10m","description":"\u003cp\u003eA very special thin wire ideal for use with DCC decoders or wiring lights into models etc.\u003c\/p\u003e\n\u003cp\u003eJust 0.6mm in diameter and very flexible. Capable of 0.5A maximum.\u003c\/p\u003e","brand":"Hobby Trax","offers":[{"title":"Default Title","offer_id":56062684266828,"sku":"9005-3045","price":7.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4428\/3980\/files\/Screenshotfrom2023-07-0210-46-45.png?v=1764079841"},{"product_id":"7-01mm-orange-ultra-thin-wire-for-dcc-decoders-and-models-10m","title":"7\/01mm orange ultra-thin wire for DCC decoders and models - 10m","description":"\u003cp\u003eA very special thin wire ideal for use with DCC decoders or wiring lights into models etc.\u003c\/p\u003e\n\u003cp\u003eJust 0.6mm in diameter and very flexible. Capable of 0.5A maximum.\u003c\/p\u003e","brand":"Hobby Trax","offers":[{"title":"Default Title","offer_id":56062684332364,"sku":"9434-0004","price":7.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4428\/3980\/files\/Screenshotfrom2023-07-0210-42-22.png?v=1764079841"},{"product_id":"7-01mm-yellow-ultra-thin-wire-for-dcc-decoders-and-models-10m","title":"7\/01mm yellow ultra-thin wire for DCC decoders and models - 10m","description":"\u003cp\u003eA very special thin wire ideal for use with DCC decoders or wiring lights into models etc.\u003c\/p\u003e\n\u003cp\u003eJust 0.6mm in diameter and very flexible. Capable of 0.5A maximum.\u003c\/p\u003e","brand":"Hobby Trax","offers":[{"title":"Default Title","offer_id":56062684365132,"sku":"6755-8887","price":7.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4428\/3980\/files\/Screenshotfrom2023-07-0210-35-43.png?v=1764079841"},{"product_id":"7-01mm-brown-ultra-thin-wire-for-dcc-decoders-and-models-10m","title":"7\/01mm brown ultra-thin wire for DCC decoders and models - 10m","description":"\u003cp\u003eA very special thin wire ideal for use with DCC decoders or wiring lights into models etc.\u003c\/p\u003e\n\u003cp\u003eJust 0.6mm in diameter and very flexible. Capable of 0.5A maximum.\u003c\/p\u003e","brand":"Hobby Trax","offers":[{"title":"Default Title","offer_id":56062684430668,"sku":"8364-5883","price":7.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4428\/3980\/files\/Screenshotfrom2023-07-0210-28-58.png?v=1764079842"},{"product_id":"nce-powercab-controller-extension-cable-curly-lead-0-5-1-5m","title":"NCE PowerCab controller extension cable curly lead","description":"\u003cp\u003eDesigned and made by us to be a perfect replacement for your flat NCE cable.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eDo you wish you could use the curly cable that comes with the controller, only to find you only use that if you have a power booster?\u003c\/p\u003e\n\u003cp\u003eWell now you can have a curly cable that DOES NOT need the power booster to work!\u003c\/p\u003e\n\u003cp\u003eReplace your flat cable with this one between your handset and PCP board and have a much neater control panel!\u003c\/p\u003e\n\u003cp\u003eLength 0.5-1m extended.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.hobbytrax.co.uk\/products\/nce-cable-coupler?_pos=1\u0026amp;_sid=ca579a89c\u0026amp;_ss=r\"\u003eLooking to couple this to the end of your existing cable? Then you need our NCE cable coupler!\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003ePlease note: This cable is not suitable for locos with smoke or steam generators.\u003c\/p\u003e","brand":"Hobby Trax","offers":[{"title":"Default Title","offer_id":56062686921036,"sku":"4325-7562","price":14.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4428\/3980\/files\/6-5FT-RJ12-4P4C-Male-to-Male-Telephone-Handset-Cable-Extension-Cord-Curly-Coil-Line-Cable.jpg?v=1764079858"},{"product_id":"nce-powercab-controller-extension-cable-5m","title":"NCE PowerCab controller extension cable 5m","description":"\u003cp\u003eThis is a standard 5m flat cable to extend or replace your existing cable between the controller and the PCP board.\u003c\/p\u003e\n\u003cp\u003eNot for use with a power booster.\u003c\/p\u003e\n\u003cp\u003ePlease note: This cable is not suitable for locos with smoke or steam generators.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/hobbytrax.com.au\/products\/nce-powercab-controller-extension-cable-3m?_pos=1\u0026amp;_psq=nce+powercab+controller+extension+cable+3m\u0026amp;_ss=e\u0026amp;_v=1.0\"\u003eAlso, in a 3m flat Cable.\u003c\/a\u003e\u003c\/p\u003e","brand":"Hobby Trax","offers":[{"title":"Default Title","offer_id":56062690885964,"sku":"4390-9453","price":15.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4428\/3980\/files\/download_6_272de7c3-d802-40ef-b9c1-b76485e88ec5.jpg?v=1764079879"},{"product_id":"nce-powercab-controller-extension-cable-3m","title":"NCE PowerCab controller extension cable 3m","description":"\u003cp\u003eThis is a standard 3m flat cable to extend or replace your existing cable between the controller and the PCP board.\u003c\/p\u003e\n\u003cp\u003eNot for use with a power booster.\u003c\/p\u003e\n\u003cp\u003ePlease note: This cable is not suitable for locos with smoke or steam generators.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/hobbytrax.com.au\/products\/nce-powercab-controller-extension-cable-5m?_pos=1\u0026amp;_psq=NCE+PowerCab+controller+extension+c\u0026amp;_ss=e\u0026amp;_v=1.0\"\u003eAlso in 5m Flat Cable\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Hobby Trax","offers":[{"title":"Default Title","offer_id":56062691082572,"sku":"4390-7534","price":12.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4428\/3980\/files\/download_6_761288e9-01c5-4f6a-ad30-6f65998a8ff1.jpg?v=1764079880"},{"product_id":"decoder-putty-20cm","title":"DCC Decoder putty 20cm","description":"\u003cp\u003eThis is like super strong blue tack! Ideal for fixing decoders and speakers into locomotives so they don't move.\u003c\/p\u003e\n\u003cp\u003eTear a little piece off and work it in your fingers until it becomes soft. Then press it into place and it will hold your decoder or speaker firm.\u003c\/p\u003e\n\u003cp\u003eComes in a 20cm length that's enough for fixing between 20-30 decoders.\u003c\/p\u003e","brand":"Hobby Trax","offers":[{"title":"Default Title","offer_id":56062691148108,"sku":"5439-0231","price":5.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4428\/3980\/files\/DSC04221.jpg?v=1764079881"},{"product_id":"nce-power-cab-holder","title":"NCE Power Cab controller holder","description":"\u003cp\u003eNeed a holder for your NCE controller to tidy up your control panel? Try this!\u003c\/p\u003e\n\u003cp\u003eA 3D printed controller holder or caddy for the NCE Power Cab.\u003c\/p\u003e\n\u003cp\u003eComplete with screw holes to fix to the edge of your baseboard and available in black.\u003c\/p\u003e\n\u003cp\u003eAlso available in bright yellow so you can find it easily on a cluttered control panel!\u003c\/p\u003e\n\u003cp\u003ePlease note NCE handset not included. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Hobby Trax","offers":[{"title":"Yellow","offer_id":56062691279180,"sku":"6540-0422","price":16.95,"currency_code":"AUD","in_stock":false},{"title":"Black","offer_id":56062691311948,"sku":"6540-0423","price":16.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4428\/3980\/files\/DSC04092.jpg?v=1764079881"},{"product_id":"nce-power-cab-programming-track-switch","title":"NCE Power Cab Programming Track switch","description":"\u003cp\u003eThe NCE is a great controller, however the biggest drawback is the lack of a programming track terminals like you find on the Gaugemaster \/ MCR Prodigy controllers.\u003c\/p\u003e\n\u003cp\u003eWell now you can add a switchable programming track to your NCE Power Cab controller!\u003c\/p\u003e\n\u003cp\u003eSimple plug and play installation, you just pull out the plug going to the small adapter board and connect our switch. No soldering required, can be fitted to any existing installation.\u003c\/p\u003e\n\u003cp\u003eThe 3 position switch provides power to either the main track, a separate programming track, or completely isolates all the track to allow for maintenance.\u003c\/p\u003e\n\u003cp\u003eTwo versions are available. Both are electrically identical and only the instructions and regulatory information are different. If you are in the US, please purchase the US version, for Australia and other countries, please purchase the UK version.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Hobby Trax","offers":[{"title":"UK version","offer_id":56062691574092,"sku":"8445-0545","price":24.99,"currency_code":"AUD","in_stock":false},{"title":"US version","offer_id":56062691606860,"sku":"8445-0546","price":24.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4428\/3980\/files\/DSC03880-removebg-preview.png?v=1764079883"},{"product_id":"nce-power-plug-for-powercab-connection-board-pcp","title":"NCE power plug for PowerCab connection board (PCP)","description":"\u003cp\u003eNeed a spare plug for the little board supplied with the NCE power cab?\u003c\/p\u003e\n\u003cp\u003eWell this is the right one for you!\u003c\/p\u003e\n\u003cp\u003eEasy push fit into the board and screw terminals for your wires. Fits perfectly!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Hobby Trax","offers":[{"title":"Default Title","offer_id":56062692098380,"sku":"6755-0313","price":4.45,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4428\/3980\/files\/DSC03812-removebg-preview.png?v=1764079886"},{"product_id":"dcc-decoder-tester-1","title":"DCC Decoder tester","description":"\u003ch2\u003eExclusive from Hobby Trax!!!\u003c\/h2\u003e\n\u003cp\u003eOur DCC decoder tester will allow you to test decoders before fitting them to your loco's\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eTests all 6, 8 and 21 pin decoders up to 6 functions as well as hardwired decoders too!\u003c\/p\u003e\n\u003cp\u003eWorks with any type of DCC controller, simply plug your decoder into the tester, then connect the tester to the track and operate as normal.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta http-equiv=\"content-type\" content=\"text\/html; charset=utf-8\"\u003eClear LED indicators show functions, lights as well as direction and track power.\u003c\/p\u003e\n\u003cp\u003eNever waste time fitting a faulty decoder again!\u003c\/p\u003e","brand":"Hobby Trax","offers":[{"title":"Default Title","offer_id":56062694588748,"sku":"4221-9533","price":48.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4428\/3980\/files\/DSC02280-removebg-preview_cce967a2-f260-4be1-889f-982e600e45f9.png?v=1764079908"}],"url":"https:\/\/hobbytrax.com.au\/collections\/dcc-systems.oembed","provider":"Hobby Trax Australia","version":"1.0","type":"link"}