{"title":"Turnouts","description":"","products":[{"product_id":"solenoid-switch-mounting-kit","title":"Solenoid point motor switch mounting kit (Peco PL13 \/ PL15 equivalent)","description":"\u003cp\u003eThis switch mounting plate comes ready assembled to glue to the bottom of any standard Peco or Hornby solenoid point motor to provide either one or two microswitches which operate with the position of the point.\u003c\/p\u003e\n\u003cp\u003eAvailable with either one microswitch (equivalent to Peco PL-13) or two microswitches (equivalent to Peco PL-15)\u003c\/p\u003e\n\u003cp\u003eFitted with screw terminal plugs and sockets for easy wiring.\u003c\/p\u003e\n\u003cp\u003eOn an analogue layout you would typically use one microswitch to operate a pair of LED's on your mimic control panel.\u003c\/p\u003e\n\u003cp\u003eOn a digital (DCC) layout you might use one microswitch for the mimic LED's and the other for controlling the frog on the electrofrog point.\u003c\/p\u003e\n\u003cp\u003eBoth microswitches are independent and can be used for any application.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.hobbytrax.com.au\/products\/peco-and-hornby-underside-point-motor-mounting-bracket-base?_pos=1\u0026amp;_psq=mounting-plate\u0026amp;_ss=e\u0026amp;_v=1.0\"\u003eUse with our mounting plates for an easy under-board fixing and wiring solution!\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eComes complete with full instructions and example wiring diagrams for all typical applications.\u003c\/p\u003e\n\u003cp\u003eMicroswitch contacts are rated at 125VDC at 1A and are single pole change-over (SPDT)\u003c\/p\u003e\n\u003cp\u003eAvailable in packs of 1, 5 or 10.\u003c\/p\u003e\n\u003cp\u003eNote plastic colour may vary. Solenoid point motor and mimic LED's not included.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Hobby Trax","offers":[{"title":"Single microswitch \/ 1","offer_id":56062670766412,"sku":"7431-1001","price":8.95,"currency_code":"AUD","in_stock":false},{"title":"Single microswitch \/ 5","offer_id":56062670799180,"sku":"7431-1005","price":44.95,"currency_code":"AUD","in_stock":false},{"title":"Single microswitch \/ 10","offer_id":56062670831948,"sku":"7431-1010","price":90.95,"currency_code":"AUD","in_stock":false},{"title":"Dual microswitch \/ 1","offer_id":56062670864716,"sku":"7431-2001","price":19.95,"currency_code":"AUD","in_stock":false},{"title":"Dual microswitch \/ 5","offer_id":56062670897484,"sku":"7431-2005","price":89.95,"currency_code":"AUD","in_stock":false},{"title":"Dual microswitch \/ 10","offer_id":56062670930252,"sku":"7431-2010","price":168.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4428\/3980\/files\/DSC06560.jpg?v=1764079785"},{"product_id":"peco-and-hornby-underside-point-motor-mounting-bracket-base","title":"Peco and Hornby point motor mounting bracket base plate (equ. to PL-9)","description":"\u003cp\u003e3D printed from our own CAD designs.\u003c\/p\u003e\n\u003cp\u003eSuitable for Peco PL-10, PL-10e and also Hornby R8014 solenoid point motors.\u003c\/p\u003e\n\u003cp\u003eEquivalent to Peco PL-9.\u003c\/p\u003e\n\u003cp\u003eComplete with two fixing screws per plate.\u003c\/p\u003e\n\u003cp\u003eAvailable in packs of 1, 5 or 10.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c!----\u003e","brand":"Hobby Trax","offers":[{"title":"1","offer_id":56062673944908,"sku":"4439-6274","price":4.95,"currency_code":"AUD","in_stock":false},{"title":"5","offer_id":56062673977676,"sku":"4439-6275","price":19.95,"currency_code":"AUD","in_stock":false},{"title":"10","offer_id":56062674010444,"sku":"4439-6276","price":32.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4428\/3980\/files\/DSC06464.jpg?v=1764079790"},{"product_id":"18vdc-1a-power-supply","title":"18VDC 1A power supply for point motor solenoids","description":"\u003cp\u003eDon't have a suitable output on your controller for point motors?\u003c\/p\u003e\n\u003cp\u003eThen you need this little power supply!\u003c\/p\u003e\n\u003cp\u003eWorks with all solenoid-type point motors from Hornby, Peco and Seep.\u003c\/p\u003e\n\u003cp\u003eSupplied with an adapter (or bare wires) for use with our Tyson range of capacitor discharge units.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.hobbytrax.com.au\/products\/tyson-capacitor-discharge-unit?_pos=2\u0026amp;_sid=ade1c94ea\u0026amp;_ss=r\"\u003eMeet the Tyson standard version here\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.hobbytrax.com.au\/products\/tyson-xtra-capacitor-discharge-unit?_pos=1\u0026amp;_sid=ade1c94ea\u0026amp;_ss=r\"\u003eMeet the Tyson Xtra with even more punch here!\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Hobby Trax","offers":[{"title":"Default Title","offer_id":56062697472332,"sku":"6325-9964","price":28.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4428\/3980\/files\/PW02729-40_1.jpg?v=1764079921"},{"product_id":"tyson-xtra-capacitor-discharge-unit","title":"Tyson Xtra Capacitor Discharge Unit","description":"\u003cp\u003eMeet the Tyson Xtra, it's got a knock-out punch!\u003c\/p\u003e\n\u003cp\u003eConnect this unit to your points and it will deliver a knock-out punch of energy from it's huge bank of capacitors ensuring your points switch reliably every time.\u003c\/p\u003e\n\u003cp\u003eThis capacitor discharge unit (CDU) is our largest version with 4 huge capacitors and is suitable for larger layouts switching multiple point motor solenoids at once. For example route setting in a storage yard.\u003c\/p\u003e\n\u003cp\u003eFitted with an automatic discharge function which will discharge the capacitors once the power is removed.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eSupply voltage 16-24VAC or DC\u003c\/p\u003e\n\u003cp\u003eSize of board 80x50mm (45mm high)\u003c\/p\u003e\n\u003cp\u003eConnections: Screw terminals\u003c\/p\u003e\n\u003cp\u003eSupplied with full instructions, free technical support and a lifetime warranty against failures.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCompatible with all major brands of point motor including Peco, Hornby and Seep.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eNeed a power supply? If your controller doesn't have a separate output (usually marked AUX or similar) then use our \u003ca href=\"https:\/\/www.hobbytrax.com.au\/products\/18vdc-1a-power-supply?_pos=3\u0026amp;_sid=3f308eb74\u0026amp;_ss=r\"\u003e18V power supply\u003c\/a\u003e\u003ca href=\"https:\/\/www.hobbytrax.co.uk\/products\/18vdc-1a-power-supply?_pos=3\u0026amp;_sid=3f308eb74\u0026amp;_ss=r\"\u003e\u003c\/a\u003e, perfect for solenoid point motors.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Hobby Trax","offers":[{"title":"Default Title","offer_id":56062698127692,"sku":"1144-8000","price":28.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4428\/3980\/files\/DSC00427-removebg-preview.png?v=1764079924"},{"product_id":"tyson-capacitor-discharge-unit","title":"Tyson Capacitor Discharge Unit","description":"\u003cp\u003eMeet the Tyson, it's got a knock-out punch!\u003c\/p\u003e\n\u003cp\u003eConnect this unit to your points, and it will deliver a knock-out punch of energy from its huge twin capacitors, ensuring your points switch reliably every time.\u003c\/p\u003e\n\u003cp\u003eThis capacitor discharge unit (CDU) is suitable for most standard-sized layouts switching one or two-point motors simultaneously.\u003c\/p\u003e\n\u003cp\u003eNeed even more power? Our \u003ca href=\"https:\/\/www.hobbytrax.com.au\/products\/tyson-xtra-capacitor-discharge-unit?_pos=1\u0026amp;_sid=3f308eb74\u0026amp;_ss=r\" title=\"Tyson Xtra Capacitor Discharge Unit\"\u003eTyson Xtra version\u003c\/a\u003e is perfect for larger layouts, switching multiple point motor solenoids at once. For example route setting in a storage yard, or for Peco point motors with multiple switches fitted.\u003c\/p\u003e\n\u003cp\u003eFitted with an automatic discharge function which will discharge the capacitors once the power is removed.\u003c\/p\u003e\n\u003cp\u003eSupply voltage 16-24VAC or DC\u003c\/p\u003e\n\u003cp\u003eSize of board 80x50mm\u003c\/p\u003e\n\u003cp\u003eConnections: Screw terminals\u003c\/p\u003e\n\u003cp\u003eSupplied with full instructions, free technical support and a lifetime warranty against defects.\u003c\/p\u003e\n\u003cp\u003eCompatible with all major brands of point motor, including Peco, Hornby and Seep.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eNeed a power supply? If your controller doesn't have a separate output (usually marked AUX or similar) then use our \u003ca href=\"https:\/\/www.hobbytrax.com.au\/products\/18vdc-1a-power-supply?_pos=3\u0026amp;_sid=3f308eb74\u0026amp;_ss=r\"\u003e18V power supply\u003c\/a\u003e, perfect for solenoid point motors.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Hobby Trax","offers":[{"title":"Default Title","offer_id":56062698258764,"sku":"1144-8721","price":22.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4428\/3980\/files\/DSC00428-removebg-preview.png?v=1764079925"},{"product_id":"switch-single-pole-double-throw-biased-spdt-on-off-on","title":"Switch single pole double throw biased (SPDT) (ON)-OFF-(ON)","description":"\u003cp\u003eThese miniature switches are biased to the centre position so are ideal for controlling point motors. Fixing hole size is 6.35mm. Rated at 5A 28VDC\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Hobby Trax","offers":[{"title":"Default Title","offer_id":56062698979660,"sku":"3618-7609","price":4.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4428\/3980\/files\/Switch_55d4958d-6e3e-41e1-a6f9-1f435b0f2643.png?v=1764079930"}],"url":"https:\/\/hobbytrax.com.au\/collections\/turnouts.oembed","provider":"Hobby Trax Australia","version":"1.0","type":"link"}